welcome! Changzhou Haihan Drying Equipment Technology Co., Ltd.
  • TEL:0519-88673995|中文|ENGLISH
  • HOME ABOUT US PRODUCT NEWS ENGINEERING SERVICE DEVICE CONTACT US
  • Company News Industry News Technology Center
  • Your location:Home>NEWS > Company News >

    Introduction to the latest development direction and performance of oven TIME:2018-11-22 17:44:10

    Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News Company News public with the development of science and technology and the degree of automation further increase the oven as a common laboratory equipment also continues to develop, from a single product evolved in many directions, such as digital displays, computer temperature control, stainless steel, vacuum oven, and so on. The following gives a brief introduction to the current advanced on the market oven. 
    A stainless steel liner oven 


    Instrument Description: 

    1. Temperature range: room temperature 10 ° C to above 250 or 300 ° C. 

    2 .. degree temperature range: ± 0.2 ° C; temperature uniformity: ± 2 ° C. 

    3. spiral air supply system. 

    4. There are two natural convection and forced air. 

    Features: 

    1. The use of high-quality stainless steel liner. 

    2. The control panel has two types: standard and comfort, and so programmable. 

    Second, the vacuum oven 

    Instrument Description: 

    1. The maximum heating temperature is 280 ℃. 

    2. Maximum vacuum up to 762mmHg. 

    3. The injection may be an inert gas like nitrogen or helium. 

    Features: 

    not applicable to ordinary drying, but also for vacuum casting, water testing, curing, regulation and dehydration. 

    Third, the dense oven 

    Instrument Description: 

    1. Temperature range: room temperature above 5 ℃ -300 ℃. 

    2. Heat convection. 

    3. Temperature accuracy: ≤ ± 0.3 ℃. 

    4. Temperature uniformity: +/- 0.8 / 2.0 / 3.7 ℃ . 

    Features: 

    1. Advanced preheat the oven cavity design. 

    2. Adjustable temperature with overheating protection device.

    3. microcomputer temperature controller and digital timer type. 

    4. Microcomputer multifunction controller, the timer may be extended Sheding, heating rate, heating power, like print interval. 

    5. With RS232 interface, the printer can be connected to the output report. 

    With the analysis of the development and continuous improvement of technology, analytical instruments, laboratory ovens and other ancillary facilities will have the same continuous development.